16ga
Moreover, can I put a 16 gauge in my cartilage?
Yes you can, in fact that’s typically what a piercer will do, especially with cartilage piercings. They pierce with a gauge size bigger than the actual jewelry. It allows room for swelling and placing the jewelry.
| Gauge | Inches | Millimeters |
|---|---|---|
| 20G | .032″ | 0.81mm |
| 18G | .040″ | 1.0mm |
| 16G | .050″ | 1.2mm |
| 14G | .064″ | 1.6mm |
Regarding this, what gauge is a standard earring?
Any standard size earring or post will fit you. If you’ve been pierced with a needle in a piercing shop, most likely you’re at a 20 or 18 gauge. No worries! The smaller the gauge the bigger the hole, so any standard size earring can be worn in addition to 20 or 18 gauge captive rings, cartilage studs, etc.
Can you gauge cartilage?
Most of the time, people stretch their cartilage because they want to wear jewelry that’s only one or two gauges larger than the gauge at which they were pierced. However, it is possible to stretch your cartilage to a gauge large enough to wear a small plug.
What is smaller than a 16 gauge?
An 18 gauge, one of the smallest gauges, is actually smaller than a 16 gauge earring, with the largest gauges being 0, 00, and 000 gauge jewelry.
What gauge does Claire’s use for cartilage?
Well, I just found out that Claire’s pierces with a 20 gauge and apparently the more common gauge for cartilage is 16.
Can I wear regular earrings in my cartilage?
In some cases, you can use any type of earring for the cartilage piercing, such as hoops and posts. Yet, earrings made for cartilage are generally more comfortable. Cartilage earring types include: … Posts or studs: Posts or studs in all metal or metal with gem stones are suitable for cartilage piercings.
When can I put a hoop in my cartilage?
Most piercing points suggest 4 to 6 weeks for changing cartilage but it’s better to wait at least 8 to 10 weeks. It also depends on how many times your ear is infected. When you feel fully safe then you can change your cartilage piercing, you can change them with small size earrings.
Can you put a 14g in a 16g?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. … The size difference between the two is small, but if you go back and forth it would obviously be a stretch every time you wanted to wear the 14’s, since your ear would shrink back to a 16g while you had that jewelry in.
What’s smaller than a 14 gauge?
14 gauge = 1/16-inch or 1.6 millimeters. 8 gauge = 1/8-inch or 3.2 millimeters. 2 gauge = 1/4-inch or 6.5 millimeters. 0 gauge = 5/16-inch or 8.3 millimeters.
Which is smaller 16g or 14g?
Jewelry is measured through a gauge system (see chart below). The higher the gauge number the
| Gauge | Millimeter | Inch |
|---|---|---|
| 16g | 1.2mm | 3/64″ |
| 14g | 1.6mm | 1/16″ |
| 12g | 2mm | 5/64″ |
| 10g | 2.4mm | 3/32″ |
What is the smallest gauge size?
The sizes range from millimeter measurements to inch measurements. The smallest gauge, 20, measures 0.88 millimeters or 1/32 inch. The bigger the gauge, the smaller the numbers get.
What is smaller 20 gauge or 18 gauge?
Gauges get larger with decreasing number (i.e. a size 00G is massive compared to a 20 gauge). with an 18 gauge. If you want it smaller, ask for a 20 or even 22 gauge when getting pierced.
What are the sizes of ear gauges?
Standard ear piercings are usually pierced at 20g or 18g. Gauge sizes go up (or down, depending on how you look at it) in even numbers from there, so the next largest size from an 18g is 16g, then 14g, then 12g, and so on. When you get to 0g, the next size is 00g (pronounced “double zero gauge“).
