A straight barbell (sometimes referred to as an industrial barbell when used in this piercing type) connects the two ear piercings, which are usually located in the helix and anti-helix. … Since you will get two piercings at once for your industrial piercing, aftercare practices can be a little more difficult.
Consequently, what gauge is a industrial bar?
Standard piercing sizes
| Piercing | Standard Gauge | Standard Length |
|---|---|---|
| Tongue Piercing | 14G | 5/8″ |
| Cartilage Piercing | 16G , 18G | 3/16″ , 1/4″ and 5/16″ |
| Eyebrow Piercing | 16G (14G is also commonly used) | 1/4″ , 5/16″ and 3/8″ |
| Industrial Barbell | 14G (16G is also commonly used) | 1 1/2″ (varies) |
You tend to draw people in with your charming personality, but you only have a few very close friends. You’re less likely to get hurt that way, because you may look all rough and tumble, but you’re a big softy on the inside.
Beside above, can anyone get an industrial piercing?
Can Everyone Get An Industrial Piercing? Most people’s ears are suitable to get an industrial piercing. However some people’s ears don’t have a prominent ridge on the upper part of the ear.
What piercings hurt the most?
- 1 of 7. Piercing: Lobe. Pain Level: Low. …
- 2 of 7. Piercing: Navel. Pain Level: Low. …
- 3 of 7. Piercing: Dermal. Pain Level: Low. …
- 4 of 7. Piercing: Nose. Pain Level: Mild. …
- 5 of 7. Piercing: Cartilage. Pain Level: High. …
- 6 of 7. Piercing: Nipple. Pain Level: High. …
- 7 of 7. Piercing: Genital. Pain Level: High.
Is industrial piercing for guys?
Industrial piercings are a popular cartilage piercing for guys and girls alike.
Is 14g or 16g bigger?
Amazon.com: Customer Questions & Answers. 14g is bigger. The lower the number, the bigger the needle or jewelry. … So buy 16g jewelry and a 14g needle, or 14g jewelry and a 12g needle.
Can you put a 14g in a 16g?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. Yes, you can stretch you piercing to a 14g just make sure that the jewelry that you‘re buying is suitable for a freshly stretching piercing.
Are there different size industrial bars?
Because every ear is different, the room between the two piercing holes differs from person to person. … For small ears, there are also many industrial barbells available with a length of 35 to 32 mm. Those lengths are also often used for vertical industrial barbells. The standard thickness is just 1.6 mm.
Is industrial piercing worth it?
Industrial piercings look absolutely awesome, but you have to take very good care of them. Cartilage piercings generally take longer to heal, and an industrial is two piercings rather than one. Stick to what your piercer says in terms of when you can take it out, and add a couple of weeks, just to be on the safe side.
Can you sleep on an industrial piercing?
You want to avoid sleeping on an industrial piercing because it adds additional pressure on the jewelry. It will be more likely to have scarring if you sleep on it.
Do industrial piercings get infected easily?
An industrial piercing can describe any two pierced holes connected by a single barbell. … Cartilage piercings — particularly those high on your ear — are more prone to infection than other ear piercings. That’s because these piercings are typically closer to your hair.
Which ear is for industrial piercing?
The traditional version of an industrial piercing consists of a helix (or outer, upper ear) piercing linked to a forward helix (or inner, upper ear) piercing by a barbell.
Is an industrial piercing Dangerous?
Industrial Piercing Risks
As long as you do double the work and don’t try to cut any corners though when it comes to aftercare, you can cut down on some of the risk. With two piercings being done on the cartilage instead of skin, you do have a slight risk of excessive bleeding.
How painful is industrial piercing?
Industrial piercings are moderately painful. While they tend to hurt more than standard lobe piercings, they’re still much less painful than piercings on more sensitive areas. … The initial piercing pain is a sharp pain, like a hard pinch, and you may also experience some pain as the jewelry is pushed in place.
