Labret piercings are by far one of the most popular studs due to their comfort and straightforward design. They are easy to change and can sometimes be mixed with interchangeable gems or beads. Labret studs have a flat back plate on one end and a threaded accessory such as a ball, stone or spike on the other.
Similarly, can you use a labret stud in your ear?
Labrets are backward!
Because labrets are designed to wear in your lip, it makes sense that they would insert from the back (the inside of your mouth). But, wearing them in your earlobes means you have to put them in backward (pushing the post through your piercing behind your ear).
Accordingly, how do you put a labret earring in?
If you experience that it’s difficult to put in, here is a simple trick:
- Use an earring stud that you already own and insert from the front as usual.
- Once through, the stud will act as a guide to find your piercing.
- Place the back piece of your piercing jewellery on the labret and push both forward.
Do labret piercings leave scars?
If your piercing hasn’t healed and you want to remove it, chances are the hole will shrink and close without a problem, leaving minimal scarring. However, if its an older piercing — like my five-year-old lip piercing — it could possibly take years for the hole to get smaller.
How painful is a labret piercing?
Vertical labret pain
Everyone’s pain tolerance is different. Most people don’t report a ton of pain with the vertical lip piercing. Some have rated it around a 4 on a scale of 1 to 10. It may hurt more than ear, nose, or other piercings because the tissue around your mouth is sensitive and dense with nerve endings.
How do you remove a labret piercing?
Hold the flat disc on the back of the labret stud with one hand or use your teeth to keep it steady. Grip the outside part of the stud with your other hand and unscrew it counterclockwise until the ball comes off. Remove the piercing by gently pulling the disc up and out of your mouth.
How do labret studs work?
Labret studs have a flat back plate on one end and a threaded accessory such as a ball on the other. … They are most associated with lip piercings – often called a “labret piercing” – but labrets are also suitable for wearing in ear and nose piercings.
How should a labret stud fit?
Labret– Labret piercings should be fitted by a piercer, and should be a fairly snug fit. With studs, they back disc may sink slightly into the lip tissue, commonly called nesting. This is normal, and as long as its easy and comfortable to pop the disc out, totally safe.
Why do people wear flat back earrings?
ComfyEarrings will bring relief to your ears and neck with flat backs that screw onto threaded earring posts. … Eliminates pressure on your ears and gives them some much-needed breathability. Covers the end of the post to protect your neck from painful pokes when you talk on the phone or sleep.
What is a flat back piercing?
Flat back studs are perfect when you need a flush fit. In lip piercings, flat back studs are essential (which is why they are often referred to as labret studs). … In piercings that beg for daintier jewelry styles, like the tragus piercing, the flat disc back allows for a discrete backing.
What earrings to wear when first pierced?
Surgical stainless steel earrings are typically your best bet for new piercings, as this metal is the least likely to cause an allergic reaction. Nickel and cobalt allergies are very common, so avoid these metals when you first get your ears pierced.
What gauge are normal earrings?
“Standard size is 18 g, which is what I mostly use for all my ear piercings,” Thompson reveals. “For piercings in general, 18 g through 16 g is the most common. For nipple or naval piercings, 14 g through 12 g is most common.
How do you take out starter earrings?
Step 1: Clean your ear piercings. Use a cotton ball dipped in hydrogen peroxide to rub your earlobes while the studs are still in. Using a cotton ball also helps to remove starter stud earrings. Step 2: Loosen the stud’s bond by twisting it in a clockwise direction.
