Any standard size earring or post will fit you. If you’ve been pierced with a needle in a piercing shop, most likely you’re at a 20 or 18 gauge. No worries! The smaller the gauge the bigger the hole, so any standard size earring can be worn in addition to 20 or 18 gauge captive rings, cartilage studs, etc.
Hereof, how do I know what gauge my piercing is?
You can use the following methods to measure the gauge of your piercing jewellery:
- BCR: Measure the width of the bar.
- Labret: Measure the width of the bar.
- Barbell: Measure the width of the bar.
- Septum Ring: Measure the width of the ring at its thickest section.
| Standard Hoop Inner Diameter | |
|---|---|
| Ear Cartilage (Helix, Tragus, Lobe, etc.) | 5/16″ (8mm) |
| Earlobe (Main, 2nd, 3rd) | 5/16″ (8mm) |
| Earhead, Thin Helix (Hole near the edge) | 1/4″ (6-6.5mm) |
| Conch | 3/8″-1/2″ (10mm-12mm) |
One may also ask, can I put a 16g in a 14g piercing?
Yes all day you can. However, the 16g post is thinner than the 14g. Downsizing is not an issue unless you’ve got a large collection of 14g jewelry that you wish to wear again. Downsizing to 16g is safe as long as it is healed.
How big is a 16 gauge earring?
U.S. Gauge Conversion
The United States typically measures gauges in inches, unlike most other countries. In the U.S. an 18 gauge earring measures approximately 5/128-inch while a 16 gauge earring measures 3/64-inch, for a difference of 1/128-inch or approximately 0.0078 inches.
Can I put a 20G in a 16g piercing?
If you pierce yourself with a 16G and put in a 20G earring, the earring will fit in easily and the hole will eventually shrink to the right size.
What size is after 1/2 inch gauges?
Convert Ear Gauge to mm and Inch
| Millimeters (mm) | Inches (“) |
|---|---|
| 10mm | 3/8″ |
| 11mm | 7/16″ |
| 12mm | 1/2“ |
| 13mm | 17/32″ |
Is 16g smaller than 14g?
As the numbers go up the size gets smaller. 14 IS thicker than 16. … The lower the number, the thicker the gauge so 16g is thinner than a 14g.
How thick is ear cartilage?
Results: The average thickness of the cutis of normal auricles was 0.8 mm, the subcutis and the cartilage layer 0.6 mm thick on average.
What is the smallest earring size?
These 1mm (1/32 inch in Diameter) Nose Studs / Ball Stud Earrings are smallest possible size and are barely larger than the ear posts themselves.
What is smaller 20 gauge or 18 gauge?
This will fit but may be slightly loose, as 20 gauge is thinner than 18 gauge. However, if it is only being worn for a short period of time and with minimal movement, it will stay in place and serve the purpose of retaining the piercing. … If your piercing is a 18 gauge then the 20 gauge would be slightly smaller.
