Consequently, which is longer 14G or 16G?
The 14g is a larger barbell than the 16g by a fraction of an inch (0.013). Most piercers will have a preference between 14 and 16g for industrial piercings and while having a 14g means you can swap out for 16g jewelry you cannot do it the other way around without pain.
| Piercing | Standard Gauge | Standard Length |
|---|---|---|
| Industrial Barbell | 14G (16G is also commonly used) | 1 1/2″ (varies) |
| Labret Lip Rings | 14G or 16G | 1/4″ , 5/16″, and 3/8″ |
| Monroe Piercing | 16G | 1/4″ , 5/16″ and 3/8″ |
| Nipple Piercing | 14G | 3/8″ , 1/2″, 9/16″ |
Also to know is, are there different sizes of industrial piercings?
Sizes. The standard size of a piercing diameter is usually 14 gauge, but some even go with a 16 gauge at first and then upgrade to a 14 gauge after the piercing has healed.
Do industrial piercings get infected easily?
An industrial piercing can describe any two pierced holes connected by a single barbell. It usually refers to double perforation on the cartilage at the top of your ear. Cartilage piercings — particularly those high on your ear — are more prone to infection than other ear piercings.
Is an industrial piercing worth it?
Industrial piercings look absolutely awesome, but you have to take very good care of them. Cartilage piercings generally take longer to heal, and an industrial is two piercings rather than one. Stick to what your piercer says in terms of when you can take it out, and add a couple of weeks, just to be on the safe side.
Can I put a 14g in a 16g industrial piercing?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. Yes, you can stretch you piercing to a 14g just make sure that the jewelry that you’re buying is suitable for a freshly stretching piercing.
Can I put a 16g in a 14g piercing?
Yes all day you can. However, the 16g post is thinner than the 14g. Downsizing is not an issue unless you’ve got a large collection of 14g jewelry that you wish to wear again. Downsizing to 16g is safe as long as it is healed.
What else can I put in my industrial piercing?
Alternatives to an Industrial Piercing bar
- Anti-helix-piercing.
- Anti-tragus-piercing.
- Conch-piercing.
- Daith-piercing.
- Rook-piercing.
- Scapha-piercing.
- Snug-piercing.
- Vertical-helix-piercing.
How do you change your industrial piercing for the first time?
What is the smallest gauge for an industrial piercing?
14G
| Piercing | Standard Gauge |
|---|---|
| Industrial Barbell | 14G (16G is also commonly used) |
| Labret Lip Rings | 14G or 16G |
| Monroe Piercing | 16G |
| Nipple Piercing | 14G |
How do you know what size industrial piercing to get?
The barbell length is measured in a straight line across the center, between the end balls. The post length is measured in a straight line, between the top ball and the base. The inner diameter is measured in a straight line across the center, inside the ring.
Are all industrial bars the same size?
The barbell piercing worn in the ear cartilage goes by a few different names : The barbell is called an industrial barbell, construction bar, or industrial project bar. Sizing of these bars varies depending on the person, because everybody’s ears are a different size.
How much does a industrial piercing cost?
Although the industrial piercing consists of two piercings, you’ll usually only be charged for one. It typically costs somewhere around $30 – $70. As always, choose a quality piercer over expense. Never go to a piercer who uses a piercing gun.
When can I change my industrial piercing?
5-9 months
