The measurement that you need is the distance from the piercing hole to the edge of your ear. Take this measurement in a straight line, because if you measure at a diagonal angle you will end up with a hoop that fits larger than you anticipated.
Moreover, is 14G bigger than 16G?
Jewelry is measured through a gauge system (see chart below). The higher the gauge number the smaller the wire is. A standard “earring” is usually 20 gauge. Jewelry gauges/sizes can vary between manufacturers.
| Gauge | Millimeter | Inch |
|---|---|---|
| 16g | 1.2mm | 3/64″ |
| 14g | 1.6mm | 1/16″ |
| 12g | 2mm | 5/64″ |
| 10g | 2.4mm | 3/32″ |
Also know, is 14G bigger than 18g?
Gauge sizes go up (or down, depending on how you look at it) in even numbers from there, so the next largest size from an 18g is 16g, then 14g, then 12g, and so on.
What is bigger 12 or 14 gauge piercing?
When discussing gauges, references to a “larger gauge” means bigger around, not a bigger number. That is to say that if you’re told that you need a larger gauge than 14, you need to look at 12 or 10 which are wider, not at 16.
Which is bigger 18 or 20 gauge nose ring?
The higher the number, the thinner the post. Nose piercing is usually done with an 18 gauge (1.02mm) post. After a nose piercing heals, most people switch to a 20 gauge (. 81mm) post because it is thinner and leaves a smaller hole.
Can I put a 20g in a 16g piercing?
yes you can. When learning about piercings sizes you will know that the bigger the number the smaller the gauge of the piercing so yes you may use an 18g. the 18g is smaller than the 16g. Just be aware though that sometimes user smaller jewelry could cause your jewelry to get accustomed to that size.
What tongue bar size is best?
16 mm
What size is 16g in MM?
1.2mm
| Gauge | Millimeters | Inches |
|---|---|---|
| 16g | 1.2mm | 0.047″ |
| 14g | 1.6mm | 0.062″ |
| 12g | 2.0mm | 0.078″ |
| 10g | 2.5mm | 0.098″ |
Is 18g or 20G smaller?
When choosing your items specifics from the drop down list, please note the following: 18G = 18 Gauge 20G= 20 Gauge 22G= 22 Gauge 14K= 14 Karat Solid Gold 18K= 18 Karat Solid Gold 24K= 24 Karat Solid Gold 1.5mm Gem= Gemstone measures approx 1.5 millimeters in size 2mm Gem= Gemstone measures approx 2 millimeters in size …
What Gauge is a flat piercing?
Rook size usually 18g or 16g. Hoop 6mm-8mm. Flat– Piercing that sits through the “flat” area of skin between your ear canal and cartilage.
Can I put a 16G in an 18g piercing?
If I pierce with a 16g needle, can I use 18g jewelry? Yes you can, in fact that’s typically what a piercer will do, especially with cartilage piercings. They pierce with a gauge size bigger than the actual jewelry. It allows room for swelling and placing the jewelry.
What MM is 8g?
Wire Gauge Conversion
| Wire Number (Gauge) | A.W.G. or B&S (Inches) | A.W.G. Metric (MM) |
|---|---|---|
| 6 | 0.162″ | 4.115mm |
| 7 | 0.1443″ | 3.665mm |
| 8 | 0.1285″ | 3.264mm |
| 9 | 0.1144″ | 2.906mm |
What size is after 1/2 inch gauges?
Convert Ear Gauge to mm and Inch
| Millimeters (mm) | Inches (“) |
|---|---|
| 11mm | 7/16″ |
| 12mm | 1/2″ |
| 13mm | 17/32″ |
| 14mm | 9/16″ |
What is a 16g piercing?
16G (14G is also commonly used) Industrial Barbell. 14G (16G is also commonly used) Labret Lip Rings.
