You can use the following methods to measure the gauge of your piercing jewellery:
- BCR: Measure the width of the bar.
- Labret: Measure the width of the bar.
- Barbell: Measure the width of the bar.
- Septum Ring: Measure the width of the ring at its thickest section.
In respect to this, how many MM is a cartilage piercing?
JEWELRY TYPE
| Standard Hoop Inner Diameter | |
|---|---|
| Ear Cartilage (Helix, Tragus, Lobe, etc.) | 5/16″ (8mm) |
| Earhead, Thin Helix (Hole near the edge) | 1/4″ (6-6.5mm) |
| Conch | 3/8″-1/2″ (10mm-12mm) |
| Nose | 5/16″ (8mm) |
An 18 gauge, one of the smallest gauges, is actually smaller than a 16 gauge earring, with the largest gauges being 0, 00, and 000 gauge jewelry.
Likewise, people ask, can I put a 16 gauge in a 18 gauge hole cartilage?
Yes you can, in fact that’s typically what a piercer will do, especially with cartilage piercings. They pierce with a gauge size bigger than the actual jewelry. It allows room for swelling and placing the jewelry. … Generally a piercer will use an 18f needle and use a 20g stud if it’s your ears for example.
Can I put a 20g in a 16g piercing?
Yes you can, in fact that’s typically what a piercer will do, especially with cartilage piercings. … Generally a piercer will use an 18f needle and use a 20g stud if it’s your ears for example. Take a look at this photo for example: The difference between 16g and 18g is about .
Can I put a 14G in a 16g piercing?
14g is bigger then 16g. The lower the number the bigger it gets. If your piercing is healed and you’ve had it for a while you might be able to. There’s not a huge difference between the two, but it might be enough to keep it from going in.
Is a hoop or stud better for cartilage piercing?
Is a Hoop or Stud Better for Cartilage Piercings? It is always better to get a cartilage piercing initially done with a stud. It is easier for the piercing to heal on a long, straight post rather than a curved post.
How thick is ear cartilage?
Results: The average thickness of the cutis of normal auricles was 0.8 mm, the subcutis and the cartilage layer 0.6 mm thick on average.
How do I measure my cartilage piercing?
Line up the edge of paper with the outside of your ear. Now, mark where your piercing is on the paper and measure the marked portion against a ruler. Using a piece of paper like this is more accurate than just holding up a ruler to your ear in front of the mirror.
