Inches & Millimeters Gauge Conversion Chart:
| Gauge | Inches | Millimeters |
|---|---|---|
| 20G | .032″ | 0.81mm |
| 18G | .040″ | 1.0mm |
| 16G | .050″ | 1.2mm |
| 14G | .064″ | 1.6mm |
Moreover, what is a 20 gauge earring?
At Pagoda, ear piercing is done using 20 gauge piercing earrings. These are among the smallest sizes and are designed to create small holes sized for standard pierced earrings. This is the gauge commonly used for nose piercings as well.
Beside above, what size needle is used to pierce ears?
Gauge Size
| GAUGE | COMMON PIERCINGS |
|---|---|
| 20G (0.81mm) | Most earlobe piercings are made with a 20G needle, as are some nose piercings. |
| 18G (1.0mm) | An 18G needle can be used for earlobe piercings, nose piercings, as well as some cartilage piercings (e.g. forward helix). 18G earrings are great for many healed cartilage piercings. |
What is the smallest earring size?
These 1mm (1/32 inch in Diameter) Nose Studs / Ball Stud Earrings are smallest possible size and are barely larger than the ear posts themselves.
What is bigger a 20 or 18 gauge?
The higher the number, the smaller the gauge. If your piercing is a 18 gauge then the 20 gauge would be slightly smaller.
What are earring gauge sizes?
Standard ear piercings are usually pierced at 20g or 18g. Gauge sizes go up (or down, depending on how you look at it) in even numbers from there, so the next largest size from an 18g is 16g, then 14g, then 12g, and so on. When you get to 0g, the next size is 00g (pronounced “double zero gauge“).
How do I know what gauge my earring is?
The gauge is how thick your jewelry is. Jewelry gets thicker the smaller the number gets. For example, an 18 gauge nose stud is thicker than a 22 gauge nose stud. You will see gauge written like this: 16G, 16g, and 16 gauge.
What is the size of a normal earring?
18 g
Can I put a 14g in a 16g piercing?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. Yes, you can stretch you piercing to a 14g just make sure that the jewelry that you’re buying is suitable for a freshly stretching piercing.
How far apart should ear piercings be?
Therefore, the stud will take up 6-6.5mm on each side of the piercing hole. So the second piercing should be at least 8mm away from the center of the first hole, so the jewelry in the first and second holes do not touch. Even spacing between ear lobe holes two and up the ear is a matter of style.
How can I make gauging less painful?
First, apply 3-5 drops of oil to the front and back of your piercing and gently slide the stretching taper in until you experience mild discomfort. If your skin turns white around the taper, back the taper up slightly – a white ring of skin is a sign that you’re stretching too fast!
How can I increase my piercing size?
Simply wrap one layer (or more) of tape around the jewelry and re-insert it into the piercing. You will repeat this method over time, gradually adding more tape and thus increasing the size of the hole. But not just any tape will do.
Is it okay to start stretching at 14g?
Getting Started
The starting point for most people is 14g, which is just slightly larger than a regular earring. If you’ve only recently healed from a regular ear piercing, you may want to start out with 16g tapers, just to be on the safe side.
