The industrial piercing is really two piercings in one: an outer helix piercing connected to a forward helix piercing by a straight barbell. … While popular, this piercing doesn’t work for all ears, as you need to have a defined helix, or ear “ridge,” and enough space for the barbell to sit unobstructed.
Just so, what ear shape do you need for an industrial piercing?
helix
Moreover, can your ears be too small for an industrial piercing?
If you have a smaller ear, you might not be able to accommodate the industrial piercing. … If you’ve had problems healing cartilage in the past, then it’s a good idea to talk to your piercer before pursuing the industrial piercing.
What ears can’t get industrial piercing?
Most people’s ears are suitable to get an industrial piercing. However some people’s ears don’t have a prominent ridge on the upper part of the ear. If your ear has a prominent ridge that runs from the upper part of the ear to about midway then you should be able to get an industrial no problem.
Is industrial piercing worth it?
Industrial piercings look absolutely awesome, but you have to take very good care of them. Cartilage piercings generally take longer to heal, and an industrial is two piercings rather than one.
What size do they pierce your industrial with?
Standard piercing sizes
| Piercing | Standard Gauge | Standard Length |
|---|---|---|
| Tongue Piercing | 14G | 5/8″ |
| Cartilage Piercing | 16G , 18G | 3/16″ , 1/4″ and 5/16″ |
| Eyebrow Piercing | 16G (14G is also commonly used) | 1/4″ , 5/16″ and 3/8″ |
| Industrial Barbell | 14G (16G is also commonly used) | 1 1/2″ (varies) |
Can you wear headphones with an industrial piercing?
Although many headphones have a fairly light touch on your ears, over time that pressure can affect your piercing. At least for the first 2 to 3 months, you‘re better off wearing earbuds.
How painful is industrial piercing?
Industrial piercings are moderately painful. While they tend to hurt more than standard lobe piercings, they’re still much less painful than piercings on more sensitive areas. … The initial piercing pain is a sharp pain, like a hard pinch, and you may also experience some pain as the jewelry is pushed in place.
What does an industrial piercing say about you?
Industrial Piercing
You tend to draw people in with your charming personality, but you only have a few very close friends. You‘re less likely to get hurt that way, because you may look all rough and tumble, but you‘re a big softy on the inside.
Can you do industrial piercing yourself?
Industrial piercings A.K.A scaffold consists of two piercings connected with a single bar. Self–piercing is not advisable but if you are confident of pulling it off then here’s how.
How do I clean my industrial piercing?
To clean your piercing:
- Soak a cloth or sturdy paper towel with saline. …
- Gently wipe around each side of the barbell.
- Make sure you clean the outside and inside of your ear on each end of the piercing.
- Repeat this process several times until the holes are completely clean.
What piercings look good with industrial?
15 Industrial Piercing Ideas That Rock
- a beautifully accessorized ear with three lobe piercings, a tragus and an industrial one all done with similar studs and a bar.
- a bold ear with four lobe piercings, a daith piercing and an industrial one with shiny earrings and a bar.
Do industrial piercings get infected easily?
Industrial piercings are more prone to infection because there are 2 wounds, and the tension placed on the skin from the jewelry also increases inflammation and vulnerability to the skin. An infection occurs when harmful bacteria build up in one or both of the holes where your ear is pierced.
Should I move my industrial piercing while cleaning it?
–Never spin the jewelry, move it back and forth, or move it while you’re cleaning it. The jewelry may feel tight or like it’s not moving around and that is OK.
