At least 3 months at each size will make each stretch easier and less likely to cause damage. With all of that said – you may be able to go from 20g to 18g to 16g fairly quickly if your piercings are well healed. If they are recent – and you haven’t worn earrings for many years, go slow!
Herein, what size taper should I start with?
Getting Started
The starting point for most people is 14g, which is just slightly larger than a regular earring. If you’ve only recently healed from a regular ear piercing, you may want to start out with 16g tapers, just to be on the safe side.
Likewise, is 14G bigger than 20G?
Please refer to the metric conversion chart below.
| Gauge | Inches | Millimeters |
|---|---|---|
| 20G | .032″ | 0.81mm |
| 18G | .040″ | 1.0mm |
| 16G | .050″ | 1.2mm |
| 14G | .064″ | 1.6mm |
Can you heal a blowout without downsizing?
If you don’t downsize, the blowout is likely to get bigger. Go down a size and see how your ear feels. You might need to go down another size or two before the pressure is relieved. You want your ear lobe to relax and recover, so go down enough to feel the pressure go away.
Why do gauges stink?
The reason your ear gauges smell bad is because they’re sitting in your ear. Your skin sheds almost every hour on the hour and all of those dead skin cells are left sitting on the gauge. Thus the stinky smell. To prevent this, a strict cleaning regiment is needed.
What is ear blowout?
A blowout is one of the most common complications of ear gauging. It’s a ring of scar tissue that forms behind the jewelry and gives the piercing the appearance of turning inside out. Blowouts usually occur from trying to stretch the hole too quickly. They often cause sharp pain and inflammation.
How much can you stretch your ears before its irreversible?
What size can I stretch up to without permanent damage? There are a lot of different opinions on this topic, but the majority of professionals in the body modification industry recommend never going any larger than 2 – 0 gauge if you want your ears to totally close up where you can‘t see through them.
How long can I leave a taper in my ear?
Because of the fact that everyone’s body reacts differently, this answer varies. It is recommended that you wait at least 6 weeks in between stretches. This will give your earlobes time to heal up and become a little loose. However, we recommend that you wait 2-6 months between each stretch.
How do you install tapered plugs?
How do you taper stretched ears?
Begin pushing the taper through the hole, inserting the thinner side into the piercing first. Go slowly. Expect this to be a little uncomfortable. Put your plug at the thicker end of the taper so you can insert it into the stretched piercing immediately.
How many MM is a 6g plug?
Piercing Gauge Sizes
| Gauge | Millimeters | Inches |
|---|---|---|
| 8g | 3.0mm | 0.118″ |
| 6g | 4.0mm | 0.157″ |
| 4g | 5.0mm | 0.196″ |
| 2g | 6.0mm | 0.236″ |
Can you put a 14g in a 16g?
Can I put a 14g belly ring into a 16g hole? Potentially yes if your piercing is fully healed. But it’s going to be a tight fit. If you want to experiment then it usually works better if you try after you‘ve had a bath and dried off, as its usually easier to put piercings in at this time.
How big is a 14 gauge piercing?
1/16-inch
