Yes you can, in fact that’s typically what a piercer will do, especially with cartilage piercings. They pierce with a gauge size bigger than the actual jewelry. It allows room for swelling and placing the jewelry.
In respect to this, is 16 gauge normal for ear piercing?
Standard ear piercings are a 20g or 18g if they were pierced by a gun. If they were pierced by a professional, the lobe piercing will typically be a 16g or 14g. After a minimum of two months it is typically safe to change the jewelry, but the piercing may still feel sensitive.
| Gauge | Millimeter | Inch |
|---|---|---|
| 16g | 1.2mm | 3/64″ |
| 14g | 1.6mm | 1/16″ |
| 12g | 2mm | 5/64″ |
| 10g | 2.4mm | 3/32″ |
Also, what size needle is used for cartilage piercing?
18g needle
Can I put a 14G in a 16G piercing?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. … The size difference between the two is small, but if you go back and forth it would obviously be a stretch every time you wanted to wear the 14’s, since your ear would shrink back to a 16g while you had that jewelry in.
Can I put a 20g in a 16G piercing?
yes you can. When learning about piercings sizes you will know that the bigger the number the smaller the gauge of the piercing so yes you may use an 18g. the 18g is smaller than the 16g. Just be aware though that sometimes user smaller jewelry could cause your jewelry to get accustomed to that size.
Is 20G bigger than 16G?
Please refer to the metric conversion chart below.
| Gauge | Inches | Millimeters |
|---|---|---|
| 20G | .032″ | 0.81mm |
| 18G | .040″ | 1.0mm |
| 16G | .050″ | 1.2mm |
| 14G | .064″ | 1.6mm |
How long should a helix bar be?
The bar length you need will depend on your skin thickness and piercing location, recommended lengths are usually 6mm or 8mm. For a short and snug fit, we recommend a 6mm length, if you have thicker cartilage or prefer to leave a bit of space either side then an 8mm may be better suited.
Can you reuse piercing needles?
As a piercer, we don’t reuse needles even with the Autoclave. Please, I highly suggest you do not reuse needles. If you are concerned about sterilizing then purchase the pre sterilized needles. They should be stamped and dated.
What is the smallest gauge for belly rings?
Gauge – width of the shaft (eg. 14g)
| Gauge | Millimeter | Inches |
|---|---|---|
| 16g | 1.2mm | 3/64″ |
| 14g (standard) | 1.6mm | 1/16″ |
| 12g | 2mm | 5/64″ |
| 10g | 2.4mm | 3/32″ |
How big is a 14 gauge piercing?
1.6 millimeters
What is the smallest gauge size?
The sizes range from millimeter measurements to inch measurements. The smallest gauge, 20, measures 0.88 millimeters or 1/32 inch. The bigger the gauge, the smaller the numbers get.
Can you stretch a helix piercing?
You can stretch your tragus, conch, flat, as well as any helix piercing. BUT, when stretching cartilage you need to be aware that once it heals, the stretch is permanent! It will not shrink back down to its original size.
Is it dangerous to pierce your own cartilage?
Performing your own piercings can be risky. Infection, rejection, and poor placement may result. For the safest and best piercing, see a professional body piercer. Look up any accreditation or training required of professional piercers in your area.
What kind of earring do you use for a helix piercing?
When getting your helix pierced, the piercing jewelry should be 14k gold or implant-grade titanium. These are the highest quality metals for earrings. Genuine gold earrings, in particular, are easier to clean thoroughly and are less likely to cause infection.
