So if you would like to skip 18 gauge and stretch directly to 16 gauge from your 20 gauge piercings, you should be fine. … Never, Ever get pierced with a gun, period. Second thing – what size is normal for a cartilage piercing is generally 16g. Sometimes 18g, but most commonly 16g.
Also to know is, is it okay to go from 20G to 14G?
At least 3 months at each size will make each stretch easier and less likely to cause damage. With all of that said – you may be able to go from 20g to 18g to 16g fairly quickly if your piercings are well healed. If they are recent – and you haven’t worn earrings for many years, go slow!
Then, can you start stretching with 14G?
Getting Started
The starting point for most people is 14g, which is just slightly larger than a regular earring. If you‘ve only recently healed from a regular ear piercing, you may want to start out with 16g tapers, just to be on the safe side.
Is 20g or 16g smaller?
Please refer to the metric conversion chart below.
| Gauge | Inches | Millimeters |
|---|---|---|
| 20G | .032″ | 0.81mm |
| 18G | .040″ | 1.0mm |
| 16G | .050″ | 1.2mm |
| 14G | .064″ | 1.6mm |
Can you put a 14G in a 16g?
Can I put a 14g belly ring into a 16g hole? Potentially yes if your piercing is fully healed. But it’s going to be a tight fit. If you want to experiment then it usually works better if you try after you‘ve had a bath and dried off, as its usually easier to put piercings in at this time.
Can you heal a blowout without downsizing?
If you don’t downsize, the blowout is likely to get bigger. Go down a size and see how your ear feels. You might need to go down another size or two before the pressure is relieved. You want your ear lobe to relax and recover, so go down enough to feel the pressure go away.
What size gauge will shrink back?
2 gauge
Why is the jump from 8g to 6g so big?
It’s probably for 2 reasons. First off, there’s a larger size jump between 8g and 6g. Up until 8g, there is only a difference of 0.6mm or less in between each size. After 8g, the differences get larger, and there is a 1 mm size difference between 8g and 6g.
Why do gauges stink?
The reason your ear gauges smell bad is because they’re sitting in your ear. Your skin sheds almost every hour on the hour and all of those dead skin cells are left sitting on the gauge. Thus the stinky smell. To prevent this, a strict cleaning regiment is needed.
How do you fit double flared plugs?
Can I leave tapers in overnight?
If it’s too tight, what you’ll do is tear the skin off the inside of your hole. This is painful and incredibly unpleasant and bloody. Repeat until you get the taper all the way in. Leave it for at least a couple of hours, ideally overnight.
