The barbell piercing worn in the ear cartilage goes by a few different names : The barbell is called an industrial barbell, construction bar, or industrial project bar. Sizing of these bars varies depending on the person, because everybody’s ears are a different size.
Subsequently, how are industrial barbells measured?
The barbell length is measured in a straight line, between the end balls. The barbell length is measured in a straight line across the center, between the end balls. The post length is measured in a straight line, between the top ball and the base.
Herein, how do I know what size my piercing is?
The measurement that you need is the distance from the piercing hole to the edge of your ear. Take this measurement in a straight line, because if you measure at a diagonal angle you will end up with a hoop that fits larger than you anticipated.
Can I put a 14G in a 16G piercing?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. … The size difference between the two is small, but if you go back and forth it would obviously be a stretch every time you wanted to wear the 14’s, since your ear would shrink back to a 16g while you had that jewelry in.
Do Industrial Bar holes close?
The industrial piercing goes through cartilage in your ear and depending on how long it has been pierced it will close eventually and faster than many other piercings because of the location.
Are there different sizes of industrial piercings?
Sizes. The standard size of a piercing diameter is usually 14 gauge, but some even go with a 16 gauge at first and then upgrade to a 14 gauge after the piercing has healed. … Once they have healed, the captive bead rings can be removed and a straight barbell can be worn in their place.
What does an industrial piercing say about you?
Industrial Piercing
You tend to draw people in with your charming personality, but you only have a few very close friends. You‘re less likely to get hurt that way, because you may look all rough and tumble, but you‘re a big softy on the inside.
What is standard barbell diameter?
25mm
Can I put a 20G in a 16g piercing?
yes you can. When learning about piercings sizes you will know that the bigger the number the smaller the gauge of the piercing so yes you may use an 18g. the 18g is smaller than the 16g. Just be aware though that sometimes user smaller jewelry could cause your jewelry to get accustomed to that size.
What tongue bar size is best?
16 mm
What’s smaller than a 14 gauge?
14 gauge = 1/16-inch or 1.6 millimeters. 8 gauge = 1/8-inch or 3.2 millimeters. 2 gauge = 1/4-inch or 6.5 millimeters. 0 gauge = 5/16-inch or 8.3 millimeters.
